How to Refill HP 83A Toner Cartridge (CF283A): Step-by-Step Guide

The HP 83A (CF283A) is a legendary toner cartridge used in millions of homes and offices worldwide. Whether you are using an HP LaserJet Pro M125 in Europe or an M127fw in North America, the refill process remains the same.

In this guide, I will show you how to refill your cartridge to save money, or how to choose the best high-quality replacement if you prefer a “plug and play” solution.

Printer Compatibility (Global)

This process is identical for all printers using the CF283A (83A) and CF283X (83X) cartridges:

  • HP LaserJet Pro MFP: M125a, M125nw, M127fn, M127fw, M225dn, M225dw.
  • HP LaserJet Pro: M201dw, M201n.

Step-by-Step Refill Instructions

  1. Disassembly: Remove the side screws and separate the waste toner section from the toner hopper.
  2. Empty the Waste Bin: This is the most important step to avoid gray streaks on your prints.
  3. Refilling: Pour high-quality dedicated toner powder into the hopper.
  4. Reassembly: Align the two halves and secure the screws.

Where to Buy: Replacement Cartridges & New Printers

If you prefer not to refill, buying a high-quality compatible cartridge is the most cost-effective solution. Please choose the links based on your region:

🇺🇸 For North America (USA & Canada)

🇪🇺 For Europe & Middle East


Common Issues & Troubleshooting

If your printer shows a “Toner Low” message after refilling, it is normal. Most HP M125/M127 printers will continue to print even with the old chip. However, for the best experience, we recommend buying compatible cartridges that come with a pre-installed new chip.

Need help with other models? Check our Kyocera vertical lines fix or the HP 106A refill guide.

As an Amazon Associate, I earn from qualifying purchases.

Scroll to Top